**Introduction**
"Brown circuit board high temperature tape" is crucial for soldering protection.正确使用 it is key to avoiding board defects. Let’s outline best practices.
**Section 1: Preparation**
1. **Board cleaning**: Remove dust and flux残留 to ensure tape adhesion.
2. **Tape selection**: Choose "Brown circuit board high temperature tape" with peelable adhesive for easy post-soldering removal.
3. **Temperature verification**: Confirm tape’s耐高温300度 rating matches soldering temps (typically 250-280°C).
**Section 2: Application Techniques**
- Apply tape parallel to solder wave direction to minimize resistance.
- Overlap tape edges by 2-3mm to block solder penetration.
- Use a heat-resistant applicator to avoid manual handling-related errors.
**Section 3: Soldering Process**
- Preheat board to 150°C for 1-2 minutes to stabilize tape adhesion.
- Adjust solder wave speed to avoid prolonged exposure.
- Monitor tape during soldering for discoloration or bubbling—signs of overheating.
**Section 4: Post-Soldering Removal**
- Cool board to room temperature before peeling tape to prevent board stress.
- Peel tape slowly at a 45° angle to avoid lifting components.
- Inspect board for tape残留; use isopropyl alcohol to clean if needed.
**Section 5: Common Mistakes and Solutions**
- **Tape curling**: Apply tension during wrapping.
- **Solder leaks**: Increase overlap or use double-layering.
- **Adhesive残留**: Choose "Brown circuit board high temperature tape" with certified peelability.
**Conclusion**
Proper application of "Brown circuit board high temperature tape" ensures soldering success. For quality tapes and guidance, visit https://www.lvmeikapton.com/.
